Horizontal injection molding machine

Update: 2013/9/17      View:
  • Brand:    Tak Kwan
  • Type:    DQ-120TX
  • Price:     RMB
  • Promotion:     RMB ( 0 Customers Bought)
  • Order Online   Add to favorites
Introduction

Dongguan Tak Kwan mechanical teach you the use of horizontal injection molding machines
Horizontal injection molding machines before turning to do the following:
(1) Check all moving parts have lubricant (grease), and add a little oil.
(2) Open the heating, the paragraphs on the barrel for heating. When the temperature of each section to meet the requirements, and then holding period of time to stabilize the temperature of the machine. Holding time varies according to the requirements of the device and the plastic material are different.
(3) add a little enough in the hopper of plastic. According to the requirements of different plastics molding, some raw materials is best to be dried.
(4) to cover the heat shield on the barrel, so you can save energy, but also can extend the electric coil and current contactor life.
(5) Check the electrical control box if there is water, oil enters, if the electrical damp, do not start. Maintenance personnel should be dry before turning the electrical parts.
(6) Check the supply voltage is met, generally should not exceed ± 15%.
(7) Check the emergency stop switch, front and rear safety door switch is normal. Verify the direction of rotation of the motor and the pump are the same.
(8) Check the cooling pipe is smooth, and the oil cooler and barrel end of the cooling water jacket cooling water through
Dongguan Tak Kwan Machinery Factory focuses injection molding machines, horizontal injection molding machine, vertical injection molding machine, all-electric injection molding machines, all-electric injection molding machines, injection molding machine energy saving, rapid prototyping machines, plastic molding machines, high-speed precision molding machines, large
Two-plate injection molding machine and so on!

 

More Products